Kühlraum-Rolltor

Technical classification

Technical Parameters

Heating antifreeze               device

The design and application of the heating mechanism avoids the freezing of the guide rail caused by the heat exchange caused by the frequent operation of the door body, further ensuring stable operation and working efficiency of the door body in a low temperature environment. At the same time, it is possible to install and remove the box equipment according to the needs, and doublely guarantee the working performance of the product in a low temperature environment.

Collision recovery structure

In the event of an accidental impact, the curtain can be derailed and automatically reset during the ascent, without manual repair and control unit resetting.

Opening speed

Opening speed 0.6-2.5M/S, and can be set

Closing speed

Closing speed 0.6-1.2m/S, and can be set

Curtain

High-strength environmentally-friendly polyester fiber material is added with tear-resistant fabric in the middle. The overall thickness of blue and full-soft curtain is not less than 1mm. The tensile strength is high and the wear resistance is good. There is no friction between the curtains to generate static electricity to attract dust. Fill the insulation material. Applicable temperature: -30~+70°C.

track

The track is made of stainless steel and galvanized paint, and the surface is spray-coated to prevent rust.

Door component insulation protection

The control box and other components must meet IP54 and above, and meet the national electrical safety standards, even in harsh environments can be waterproof and dustproof.

Drive System

The professional industrial door HOFIC motor system consists of: high-speed motor for fast door, power supply 220V, power 0.75kw/750 rev / S, carrying large load S4 type. Loss of electric brake system; reducer; manual release mechanism; fault manual device, etc., motor constant torque output:

1, the overload capacity is strong, in some high-frequency occasions, the switch can work more than 2000 times a day.
2.The high resolution resolution of the 2,2000 lines and the fast response of the motor effectively avoid the problem of cumulative errors.
3. The manual release mechanism can be released during a fault or power failure, and the door is manually opened or closed to have an ideal position.

Control system

Using a dedicated (HOFIC) servo system, the core is a DSP chip, and the system receives incremental encoder signals and machinery at the rear of the motor.

The home position switch signal is used to set the door opening height:
1. The system displays the fault code function through the LED tube;
2, steering protection: when the motor drive line is connected incorrectly, the controller reports an error directly, and the door does not move;
3, the torsion ring, the position ring, the speed ring and the three rings are fully closed;
4, capable of braking function, without the electromagnetic brake pad, the motor can be stopped at the expected position, so that the door body stops at the limit position
When it is not bad;